SELECT A PRODUCT:

What's New at Price-Driscoll

Price-Driscoll Introduces:
Value Line Mold Releases and Maintenance Products

As seen in "Plastics in Canada" Magazine, October 2007 issue.

Our Value Line Mold Releases and Maintenance products were developed to answer the customers' needs for affordability, cost effectiveness, and efficiency with high quality performance, built to our usual standard of excellence.

Price-Driscoll Introduces:
Eject-It #34 Wax Release

Price-Driscoll's Eject-It #34 Wax Release is a non-silicone, synthetic wax-based release, for rubber molding, casting and encapsulating with epoxies, phenolics and molded thermoset plastics. It is a paintable alternative to silicone and fluoropolymer type releases.

Our NEW Eject-It #34 Wax Release contains no silicones or oils, NO Class I or Class II Ozone Depleting Substances, is EPA compliant and it is non-flammable.

Some of the features and benefits of Eject-It #34 Wax Release:

Features:		Benefits:
	Non Silicone		Paintable; no need to wash or clean prior to post molding operations
	No build-up		Less down time
	Heavy Duty & Non-melting		Heat stable to higher operating temperatures
	Contains No Oils		Less rejects from piece marking as it contains no silicones or oils
	Multiple releases		Increased productivity
	Superior part fidelity & finish		Improved quality
	EPA Compliant		Contains NO Class I or Class II ozone depleting substances
	Non-Flammable		Less hazardous to use

Directions for best results:

Make sure substrate is clean and non-porous.
Remove all previous residue, release agent, etc.
Hold spray nozzle about one foot from surface and apply evenly and lightly.
A very thin application will work effectively.
DO NOT wet surface; use a light mist. A little goes a long way!

Packaging:

Eject-It #34 is readily available in aerosol cans, packaged 12 twelve-ounce cans per case. Economical bulk aerosol disposable cylinders can be made upon request. Call for lead times.

Ordering Information

As seen in "Time-Compression Technologies Magazine"

our PRESS RELEASE

Price-Driscoll Introduces:
Premium Urethane Parfilm Mold Release

Price-Driscoll (Waterford, CT) has developed Premium Urethane Parfilm Mold Release in order to meet the special needs of rapid prototyping and custom molding applications where other generic urethane releases fail. Premium is specially formulated with time-proven active components that are compatible with a wide variety of mold surfaces and casting materials.

The solvent-propellant system is safe, effective, gentle and state-of-the art to yield superlative release characteristics while protecting the mold surface, yielding longer mold life. The valve system has been engineered to provide optimum delivery rate and fine atomization for even coverage, enhancing finished piece surface reproduction.

New Premium works well with intricate molds for replica work, such as human anatomy, detailed figurines, miniatures and architectural restorations, to name a few.

Packaged twelve 12-ounce cans per case, Premium is paintable, non-flammable and nearly odorless.

Introducing Fast 2 Shell Investment Casting Release

picture of Fast 2 Shell Investment Casting Release can

Price-Driscoll's Fast 2 Shell Investment Casting Release is formulated expressly for investment casting and lost wax casting. It is non-melting and will not carbonize.

Fast 2 Shell contains NO Chlorinated Solvents, NO Class I or Class II Ozone Depleting Substances and is EPA compliant.

Some of the features and benefits of Fast 2 Shell:

Features:		Benefits:
	No Washing Required!		Faster time to shell process
	Contains No Silicone		No Contaminants left behind
	Water Soluble		No accumulation in citric acid baths
	No Build-up		Less down time
	Heavy Duty & Non-melting		Heat stable to higher operating temperatures
	Non-oily		Less rejects from piece marking
	Multiple releases		Increased productivity
	Superior part fidelity & finish		Improved quality
	EPA Compliant		Contains NO Class I or Class II ozone depleting substances
	Non-Flammable		Less hazardous to use
	NO Chlorinated solvents		Safer for the worker

Directions for best results:

Make sure substrate
is clean and non-porous.
Remove all previous residue,
release agent, etc.
  Hold spray nozzle about one foot
  from surface and
  apply evenly and lightly.
A very thin application
will work effectively.
DO NOT wet surface; use a light mist.
A little goes a long way!

Packaging:

Fast 2 Shell Investment Casting Release is available for same day shipment from fresh stock in aerosol cans, packaged 12 twelve-ounce cans per case. Economical 37-pound net-weight disposable cylinders are available upon request. Call for lead time.

Ordering Information

Trade Show Information:

	MASS PLASTICS 2008
	Dates: March 26-27, 2008 Location: Royal Plaza Trade Center 150 Royal Plaza Drive Fitchburg, MA 01420 Tel: 978-342-0002 Fax: 978-343-7376 We will be at booth #1001 www.rplaza.com www.massplastics.com
	PLASTEC WEST 2008
	Dates: January 29-31, 2008 www.plastecwest.com Location: Anaheim Convention Center 800 W. Katella Ave. Anaheim, CA 92802 Tel: 714-765-8950 www.anaheimconventioncenter.com We will be at booth #5081 with our distributor: West Coast Plastics Equipment Inc. www.westcoastplastics.com

top of page

More Information:

Formulations:

Visit our formulations page to find out more about each of our mold release families.